Shop
Micro Needle Holder Forceps, Balanced
SKU:
MP-180-512-148
-14%
Micro Needle Holder, curved, 0.5mm jaw, 70mm working length
SKU:
MP-250-841-200
| Attribute | Specification |
| Product Type | Precision Neurosurgical / Microvascular Needle Holder |
| Jaw Profile | Smooth, Curved Geometry |
| Jaw Width | 0.5 mm Ultra-Fine Profile |
| Handle / Style | Micro-profile round spring handle, optimized for effortless fingertip rotation under high-magnification surgical microscopes. |
| Functional Application | Specifically engineered for driving ultra-fine cardiovascular and neurosurgical microsutures (ranging from 7-0 down to 11-0) in deeply recessed or restricted surgical corridors. |
| Clinical Benefit | The ultra-slim 0.5 mm jaw holds delicate micro-needles with absolute axial stability, preventing needle twisting or slipping without flattening the wire. Its curved tip provides superior visualization of the needle entry point and facilitates natural, ergonomic wrist articulation during suturing. |
Product Variations
| Working Length | Overall Length | Catalog Number |
| 70 mm | 200 mm / 8” | 250-841-200 |
| 90 mm | 220 mm / $8\frac{2}{3}$” | 250-841-220 |
| 120 mm | 250 mm / $9\frac{7}{8}$” | 250-841-250 |
-17%
Micro Needle Holder, diamond dusted without catch, 160mm, 61/4” working length
SKU:
MP-250-269-076
-17%
Micro Needle Holder, without catch, 160mm, 61/4” working length
SKU:
MP-250-069-076
| Attribute | Specification |
| Product Category | Micro Needle Holders |
| Lock Mechanism | Without Catch (Ohne Sperre)—smooth, spring-action open and close profile designed for continuous, rapid needle repositioning without the jarring tactile feedback or tissue disruption associated with locking mechanisms. |
| Material Construction | High-density surgical-grade stainless steel or premium titanium, ensuring high structural stability and non-glare performance under intense theater lighting. |
| Handle / Style | Ergonomic micro-spring design, balanced perfectly to allow smooth axial rotation and exceptional tactile control between the thumb and forefinger. |
| Functional Application | Engineered primarily for quick-cycle micro-suturing, fine tissue approximations, ophthalmic procedures, and microvascular anastomosis where continuous needle manipulation is required. |
Product Master Data Matrix
The following data table indexes the official master catalog numbers for these non-locking micro needle holders by jaw curvature profile, effective working length, and imperial length conversions.
| Jaw Profile Configuration | Working Length (mm) | Working Length (Inches) | Catalog Number |
| Straight | 160 mm | $6\ \frac{1}{4}''$ | 250-069-076 |
| Curved | 160 mm | $6\ \frac{1}{4}''$ | 250-069-079 |
| Straight | 180 mm | $7''$ | 250-069-080 |
| Curved | 180 mm | $7''$ | 250-069-081 |
MICRO NERVE HOOK 9.5” overall length 245mm
SKU:
MP-846-0905-1
Micro Osteotome
SKU:
MP-420-700-020
Micro Osteotome
SKU:
MP-420-700-100
Micro Osteotome with Guard
SKU:
MP-420-700-022
-8%
Micro Ring-handled Kerrison Punch
SKU:
MP-84-3632
| Attribute | Specification |
| Product Type | Micro Kerrison Punch / Bone Rongeur |
| Bite Width | 1.0mm |
| Jaw Opening | 5mm |
| Shaft Length | 180mm |
| Footplate Thickness | Thin Footplate only |
| Construction | Classic construction |
| Special Feature | Finger ring handles designed for nimble, high-precision maneuvering. |
Available Specifications (180mm Shaft Length)
| Finish | Bite Direction | 40° Angle | 90° Angle |
| Satin Finish | Up Biting Shaft | 84-3632 | 84-3631 |
| Down Biting Shaft | 84-3634 | 84-3633 | |
| Ceramic Finish | Up Biting Shaft | 847-3632 | 847-3631 |
| Down Biting Shaft | 847-3634 | 847-3633 |
-4%
Micro Rongeur, CERA-CUT® 2mm jaw
SKU:
MP-250-300-170CC
| Attribute | Specification |
| Product Type | Micro Disc Rongeur / Pituitary Forceps |
| Product Line | CERA-CUT® |
| Coating / Finish | Advanced ceramic coating for enhanced surface hardness, reduced friction, and long-lasting edge retention. |
| Bite / Jaw Size | 2 mm |
| Working Length | 170 mm / $6\frac{2}{3}$” |
Product Variations
| Jaw Configuration | Catalog Number |
| Straight | 250-300-170CC |
| Upcurved | 250-301-170CC |
USD 
EUR