Shop
-11%
KERRISON Punch, regular handle, 9.5mm opening
SKU:
MP-250-400-181
| Cutting Direction | Length (mm) | Length (inches) | Tip Size | Reference Number |
| 40° Upwards Cutting | 180mm | 7” | 1mm | MP250-400-181 |
| 180mm | 7” | 2mm | MP250-400-182 | |
| 180mm | 7” | 3mm | MP250-400-183 | |
| 180mm | 7” | 4mm | MP250-400-184 | |
| 180mm | 7” | 5mm | MP250-400-185 | |
| 180mm | 7” | 6mm | MP250-400-186 | |
| 200mm | 8” | 1mm | MP250-400-201 | |
| 200mm | 8” | 2mm | MP250-400-202 | |
| 200mm | 8” | 3mm | MP250-400-203 | |
| 200mm | 8” | 4mm | MP250-400-204 | |
| 200mm | 8” | 5mm | MP250-400-205 | |
| 200mm | 8” | 6mm | MP250-400-206 | |
| 230mm | 9” | 1mm | MP250-400-231 | |
| 230mm | 9” | 2mm | MP250-400-232 | |
| 230mm | 9” | 3mm | MP250-400-233 | |
| 230mm | 9” | 4mm | MP250-400-234 | |
| 230mm | 9” | 5mm | MP250-400-235 | |
| 230mm | 9” | 6mm | MP250-400-236 | |
| 90° Upwards Cutting | 180mm | 7” | 1mm | MP250-410-181 |
| 180mm | 7” | 2mm | MP250-410-182 | |
| 180mm | 7” | 3mm | MP250-410-183 | |
| 180mm | 7” | 4mm | MP250-410-184 | |
| 180mm | 7” | 5mm | MP250-410-185 | |
| 180mm | 7” | 6mm | MP250-410-186 | |
| 200mm | 8” | 1mm | MP250-410-201 | |
| 200mm | 8” | 2mm | MP250-410-202 | |
| 200mm | 8” | 3mm | MP250-410-203 | |
| 200mm | 8” | 4mm | MP250-410-204 | |
| 200mm | 8” | 5mm | MP250-410-205 | |
| 200mm | 8” | 6mm | MP250-410-206 | |
| 230mm | 9” | 1mm | MP250-410-231 | |
| 230mm | 9” | 2mm | MP250-410-232 | |
| 230mm | 9” | 3mm | MP250-410-233 | |
| 230mm | 9” | 4mm | MP250-410-234 | |
| 230mm | 9” | 5mm | MP250-410-235 | |
| 230mm | 9” | 6mm | MP250-410-236 | |
| 40° Downwards Cutting | 180mm | 7” | 1mm | MP250-420-181 |
| 180mm | 7” | 2mm | MP250-420-182 | |
| 180mm | 7” | 3mm | MP250-420-183 | |
| 180mm | 7” | 4mm | MP250-420-184 | |
| 180mm | 7” | 5mm | MP250-420-185 | |
| 180mm | 7” | 6mm | MP250-420-186 | |
| 200mm | 8” | 1mm | MP250-420-201 | |
| 200mm | 8” | 2mm | MP250-420-202 | |
| 200mm | 8” | 3mm | MP250-420-203 | |
| 200mm | 8” | 4mm | MP250-420-204 | |
| 200mm | 8” | 5mm | MP250-420-205 | |
| 200mm | 8” | 6mm | MP250-420-206 | |
| 230mm | 9” | 1mm | MP250-420-231 | |
| 230mm | 9” | 2mm | MP250-420-232 | |
| 230mm | 9” | 3mm | MP250-420-233 | |
| 230mm | 9” | 4mm | MP250-420-234 | |
| 230mm | 9” | 5mm | MP250-420-235 | |
| 230mm | 9” | 6mm | MP250-420-236 | |
| 90° Downwards Cutting | 180mm | 7” | 1mm | MP250-430-181 |
| 180mm | 7” | 2mm | MP250-430-182 | |
| 180mm | 7” | 3mm | MP250-430-183 | |
| 180mm | 7” | 4mm | MP250-430-184 | |
| 180mm | 7” | 5mm | MP250-430-185 | |
| 180mm | 7” | 6mm | MP250-430-186 | |
| 200mm | 8” | 1mm | MP250-430-201 | |
| 200mm | 8” | 2mm | MP250-430-202 | |
| 200mm | 8” | 3mm | MP250-430-203 | |
| 200mm | 8” | 4mm | MP250-430-204 | |
| 200mm | 8” | 5mm | MP250-430-205 | |
| 200mm | 8” | 6mm | MP250-430-206 | |
| 230mm | 9” | 1mm | MP250-430-231 | |
| 230mm | 9” | 2mm | MP250-430-232 | |
| 230mm | 9” | 3mm | MP250-430-233 | |
| 230mm | 9” | 4mm | MP250-430-234 | |
| 230mm | 9” | 5mm | MP250-430-235 | |
| 230mm | 9” | 6mm | MP250-430-236 |
-11%
KERRISON Punch, regular handle, superflat footplate
SKU:
MP-250-400-181SF
| Feature / Design | Length (mm) | Length (inches) | Tip Size | Reference Number |
| Standard Slim Line | 180mm | 7” | 1mm | MP250-400-181SF |
| 180mm | 7” | 1.5mm | MP250-400-189SF | |
| 180mm | 7” | 2mm | MP250-400-182SF | |
| 180mm | 7” | 3mm | MP250-400-183SF | |
| 180mm | 7” | 4mm | MP250-400-184SF | |
| 180mm | 7” | 5mm | MP250-400-185SF | |
| 180mm | 7” | 6mm | MP250-400-186SF | |
| 200mm | 8” | 1mm | MP250-400-201SF | |
| 200mm | 8” | 1.5mm | MP250-400-209SF | |
| 200mm | 8” | 2mm | MP250-400-202SF | |
| 200mm | 8” | 3mm | MP250-400-203SF | |
| 200mm | 8” | 4mm | MP250-400-204SF | |
| 200mm | 8” | 5mm | MP250-400-205SF | |
| 200mm | 8” | 6mm | MP250-400-206SF | |
| 230mm | 9” | 1mm | MP250-400-231SF | |
| 230mm | 9” | 1.5mm | MP250-400-239SF | |
| 230mm | 9” | 2mm | MP250-400-232SF | |
| 230mm | 9” | 3mm | MP250-400-233SF | |
| 230mm | 9” | 4mm | MP250-400-234SF | |
| 230mm | 9” | 5mm | MP250-400-235SF | |
| 230mm | 9” | 6mm | MP250-400-236SF | |
| Standard Ejector | 180mm | 7” | 2mm | MP250-400-182ESF |
| 180mm | 7” | 3mm | MP250-400-183ESF | |
| 180mm | 7” | 4mm | MP250-400-184ESF | |
| 180mm | 7” | 5mm | MP250-400-185ESF | |
| 180mm | 7” | 6mm | MP250-400-186ESF | |
| 200mm | 8” | 2mm | MP250-400-202ESF | |
| 200mm | 8” | 3mm | MP250-400-203ESF | |
| 200mm | 8” | 4mm | MP250-400-204ESF | |
| 200mm | 8” | 5mm | MP250-400-205ESF | |
| 200mm | 8” | 6mm | MP250-400-206ESF | |
| 230mm | 9” | 2mm | MP250-400-232ESF | |
| 230mm | 9” | 3mm | MP250-400-233ESF | |
| 230mm | 9” | 4mm | MP250-400-234ESF | |
| 230mm | 9” | 5mm | MP250-400-235ESF | |
| 230mm | 9” | 6mm | MP250-400-236ESF | |
| CERA-CUT® | 180mm | 7” | 1mm | MP250-400-181SFCC |
| 180mm | 7” | 2mm | MP250-400-182SFCC | |
| 180mm | 7” | 3mm | MP250-400-183SFCC | |
| 180mm | 7” | 4mm | MP250-400-184SFCC | |
| 180mm | 7” | 5mm | MP250-400-185SFCC | |
| 180mm | 7” | 6mm | MP250-400-186SFCC | |
| 200mm | 8” | 1mm | MP250-400-201SFCC | |
| 200mm | 8” | 2mm | MP250-400-202SFCC | |
| 200mm | 8” | 3mm | MP250-400-203SFCC | |
| 200mm | 8” | 4mm | MP250-400-204SFCC | |
| 200mm | 8” | 5mm | MP250-400-205SFCC | |
| 200mm | 8” | 6mm | MP250-400-206SFCC | |
| 230mm | 9” | 1mm | MP250-400-231SFCC | |
| 230mm | 9” | 2mm | MP250-400-232SFCC | |
| 230mm | 9” | 3mm | MP250-400-233SFCC | |
| 230mm | 9” | 4mm | MP250-400-234SFCC | |
| 230mm | 9” | 5mm | MP250-400-235SFCC | |
| 230mm | 9” | 6mm | MP250-400-236SFCC |
-11%
KERRISON Punch, regular handle, superflat footplate
SKU:
MP-250-411-181SF
| Feature / Design | Length (mm) | Length (inches) | Tip Size | Reference Number |
| Standard Slim Line | 180mm | 7” | 1mm | 250-411-181SF |
| 180mm | 7” | 2mm | 250-411-182SF | |
| 180mm | 7” | 3mm | 250-411-183SF | |
| 180mm | 7” | 4mm | 250-411-184SF | |
| 180mm | 7” | 5mm | 250-411-185SF | |
| 180mm | 7” | 6mm | 250-411-186SF | |
| 200mm | 8” | 1mm | 250-411-201SF | |
| 200mm | 8” | 2mm | 250-411-202SF | |
| 200mm | 8” | 3mm | 250-411-203SF | |
| 200mm | 8” | 4mm | 250-411-204SF | |
| 200mm | 8” | 5mm | 250-411-205SF | |
| 200mm | 8” | 6mm | 250-411-206SF | |
| 230mm | 9” | 1mm | 250-411-231SF | |
| 230mm | 9” | 2mm | 250-411-232SF | |
| 230mm | 9” | 3mm | 250-411-233SF | |
| 230mm | 9” | 4mm | 250-411-234SF | |
| 230mm | 9” | 5mm | 250-411-235SF | |
| 230mm | 9” | 6mm | 250-411-236SF | |
| Standard Ejector | 180mm | 7” | 2mm | 250-411-182ESF |
| 180mm | 7” | 3mm | 250-411-183ESF | |
| 180mm | 7” | 4mm | 250-411-184ESF | |
| 180mm | 7” | 5mm | 250-411-185ESF | |
| 180mm | 7” | 6mm | 250-411-186ESF | |
| 200mm | 8” | 2mm | 250-411-202ESF | |
| 200mm | 8” | 3mm | 250-411-203ESF | |
| 200mm | 8” | 4mm | 250-411-204ESF | |
| 200mm | 8” | 5mm | 250-411-205ESF | |
| 200mm | 8” | 6mm | 250-411-206ESF | |
| 230mm | 9” | 2mm | 250-411-232ESF | |
| 230mm | 9” | 3mm | 250-411-233ESF | |
| 230mm | 9” | 4mm | 250-411-234ESF | |
| 230mm | 9” | 5mm | 250-411-235ESF | |
| 230mm | 9” | 6mm | 250-411-236ESF | |
| CERA-CUT® | 180mm | 7” | 1mm | 250-411-181SFCC |
| 180mm | 7” | 2mm | 250-411-182SFCC | |
| 180mm | 7” | 3mm | 250-411-183SFCC | |
| 180mm | 7” | 4mm | 250-411-184SFCC | |
| 180mm | 7” | 5mm | 250-411-185SFCC | |
| 180mm | 7” | 6mm | 250-411-186SFCC | |
| 200mm | 8” | 1mm | 250-411-201SFCC | |
| 200mm | 8” | 2mm | 250-411-202SFCC | |
| 200mm | 8” | 3mm | 250-411-203SFCC | |
| 200mm | 8” | 4mm | 250-411-204SFCC | |
| 200mm | 8” | 5mm | 250-411-205SFCC | |
| 200mm | 8” | 6mm | 250-411-206SFCC | |
| 230mm | 9” | 1mm | 250-411-231SFCC | |
| 230mm | 9” | 2mm | 250-411-232SFCC | |
| 230mm | 9” | 3mm | 250-411-233SFCC | |
| 230mm | 9” | 4mm | 250-411-234SFCC | |
| 230mm | 9” | 5mm | 250-411-235SFCC | |
| 230mm | 9” | 6mm | 250-411-236SFCC |
-11%
KERRISON Punch, regular handle, thin footplate, 9.5mm opening
SKU:
MP-250-401-181
| Cutting Direction | Length (mm) | Length (inches) | Tip Size | Reference Number |
| 40° Upwards Cutting | 180mm | 7” | 1mm | MP250-401-181 |
| 180mm | 7” | 2mm | MP250-401-182 | |
| 180mm | 7” | 3mm | MP250-401-183 | |
| 180mm | 7” | 4mm | MP250-401-184 | |
| 180mm | 7” | 5mm | MP250-401-185 | |
| 200mm | 8” | 1mm | MP250-401-201 | |
| 200mm | 8” | 2mm | MP250-401-202 | |
| 200mm | 8” | 3mm | MP250-401-203 | |
| 200mm | 8” | 4mm | MP250-401-204 | |
| 200mm | 8” | 5mm | MP250-401-205 | |
| 230mm | 9” | 1mm | MP250-401-231 | |
| 230mm | 9” | 2mm | MP250-401-232 | |
| 230mm | 9” | 3mm | MP250-401-233 | |
| 230mm | 9” | 4mm | MP250-401-234 | |
| 230mm | 9” | 5mm | MP250-401-235 | |
| 90° Upwards Cutting | 180mm | 7” | 1mm | MP250-411-181 |
| 180mm | 7” | 2mm | MP250-411-182 | |
| 180mm | 7” | 3mm | MP250-411-183 | |
| 180mm | 7” | 4mm | MP250-411-184 | |
| 180mm | 7” | 5mm | MP250-411-185 | |
| 200mm | 8” | 1mm | MP250-411-201 | |
| 200mm | 8” | 2mm | MP250-411-202 | |
| 200mm | 8” | 3mm | MP250-411-203 | |
| 200mm | 8” | 4mm | MP250-411-204 | |
| 200mm | 8” | 5mm | MP250-411-205 | |
| 230mm | 9” | 1mm | MP250-411-231 | |
| 230mm | 9” | 2mm | MP250-411-231 | |
| 230mm | 9” | 3mm | MP250-411-231 | |
| 230mm | 9” | 4mm | MP250-411-231 | |
| 230mm | 9” | 5mm | MP250-411-231 | |
| 40° Downwards Cutting | 180mm | 7” | 1mm | MP250-421-181 |
| 180mm | 7” | 2mm | MP250-421-182 | |
| 180mm | 7” | 3mm | MP250-421-183 | |
| 180mm | 7” | 4mm | MP250-421-184 | |
| 180mm | 7” | 5mm | MP250-421-185 | |
| 200mm | 8” | 1mm | MP250-421-201 | |
| 200mm | 8” | 2mm | MP250-421-202 | |
| 200mm | 8” | 3mm | MP250-421-203 | |
| 200mm | 8” | 4mm | MP250-421-204 | |
| 200mm | 8” | 5mm | MP250-421-205 | |
| 230mm | 9” | 1mm | MP250-421-231 | |
| 230mm | 9” | 2mm | MP250-421-231 | |
| 230mm | 9” | 3mm | MP250-421-231 | |
| 230mm | 9” | 4mm | MP250-421-231 | |
| 230mm | 9” | 5mm | MP250-421-231 | |
| 90° Downwards Cutting | 180mm | 7” | 1mm | MP250-431-181 |
| 180mm | 7” | 2mm | MP250-431-182 | |
| 180mm | 7” | 3mm | MP250-431-183 | |
| 180mm | 7” | 4mm | MP250-431-184 | |
| 180mm | 7” | 5mm | MP250-431-185 | |
| 200mm | 8” | 1mm | MP250-431-201 | |
| 200mm | 8” | 2mm | MP250-431-202 | |
| 200mm | 8” | 3mm | MP250-431-203 | |
| 200mm | 8” | 4mm | MP250-431-204 | |
| 200mm | 8” | 5mm | MP250-431-205 | |
| 230mm | 9” | 1mm | MP250-431-231 | |
| 230mm | 9” | 2mm | MP250-431-231 | |
| 230mm | 9” | 3mm | MP250-431-231 | |
| 230mm | 9” | 4mm | MP250-431-231 | |
| 230mm | 9” | 5mm | MP250-431-231 |
-7%
KERRISON Swivel Punch 2-piece detachable punch
SKU:
MP-250-660-181
| Footplate / Feature | Cutting Angle & Direction | Length (mm) | Length (inches) | Tip Size | Reference Number |
| Regular Footplate | 90° Downwards Cutting | 180mm | 7” | 1mm | 250-660-181 |
| 180mm | 7” | 2mm | 250-660-182 | ||
| 180mm | 7” | 3mm | 250-660-183 | ||
| 180mm | 7” | 4mm | 250-660-184 | ||
| 180mm | 7” | 5mm | 250-660-185 | ||
| 180mm | 7” | 6mm | 250-660-186 | ||
| 200mm | 8” | 1mm | 250-660-201 | ||
| 200mm | 8” | 2mm | 250-660-202 | ||
| 200mm | 8” | 3mm | 250-660-203 | ||
| 200mm | 8” | 4mm | 250-660-204 | ||
| 200mm | 8” | 5mm | 250-660-205 | ||
| 200mm | 8” | 6mm | 250-660-206 | ||
| 230mm | 9” | 1mm | 250-660-231 | ||
| 230mm | 9” | 2mm | 250-660-232 | ||
| 230mm | 9” | 3mm | 250-660-233 | ||
| 230mm | 9” | 4mm | 250-660-234 | ||
| 230mm | 9” | 5mm | 250-660-235 | ||
| 230mm | 9” | 6mm | 250-660-236 | ||
| Thin Footplate | 40° Upwards Cutting | 180mm | 7” | 1mm | 250-610-181 |
| 180mm | 7” | 2mm | 250-610-182 | ||
| 180mm | 7” | 3mm | 250-610-183 | ||
| 180mm | 7” | 4mm | 250-610-184 | ||
| 180mm | 7” | 5mm | 250-610-185 | ||
| 180mm | 7” | 6mm | 250-610-186 | ||
| 200mm | 8” | 1mm | 250-610-201 | ||
| 200mm | 8” | 2mm | 250-610-202 | ||
| 200mm | 8” | 3mm | 250-610-203 | ||
| 200mm | 8” | 4mm | 250-610-204 | ||
| 200mm | 8” | 5mm | 250-610-205 | ||
| 200mm | 8” | 6mm | 250-610-206 | ||
| 230mm | 9” | 1mm | 250-610-231 | ||
| 230mm | 9” | 2mm | 250-610-232 | ||
| 230mm | 9” | 3mm | 250-610-233 | ||
| 230mm | 9” | 4mm | 250-610-234 | ||
| 230mm | 9” | 5mm | 250-610-235 | ||
| 230mm | 9” | 6mm | 250-610-236 | ||
| Thin Footplate | 40° Downwards Cutting | 180mm | 7” | 1mm | 250-620-181 |
| 180mm | 7” | 2mm | 250-620-182 | ||
| 180mm | 7” | 3mm | 250-620-183 | ||
| 180mm | 7” | 4mm | 250-620-184 | ||
| 180mm | 7” | 5mm | 250-620-185 | ||
| 180mm | 7” | 6mm | 250-620-186 | ||
| 200mm | 8” | 1mm | 250-620-201 | ||
| 200mm | 8” | 2mm | 250-620-202 | ||
| 200mm | 8” | 3mm | 250-620-203 | ||
| 200mm | 8” | 4mm | 250-620-204 | ||
| 200mm | 8” | 5mm | 250-620-205 | ||
| 200mm | 8” | 6mm | 250-620-206 | ||
| 230mm | 9” | 1mm | 250-620-231 | ||
| 230mm | 9” | 2mm | 250-620-232 | ||
| 230mm | 9” | 3mm | 250-620-233 | ||
| 230mm | 9” | 4mm | 250-620-234 | ||
| 230mm | 9” | 5mm | 250-620-235 | ||
| 230mm | 9” | 6mm | 250-620-236 | ||
| Foraminotomy | 40° Upwards Cutting | 180mm | 7” | 1mm | 250-680-181 |
| 180mm | 7” | 2mm | 250-680-182 | ||
| 180mm | 7” | 3mm | 250-680-183 | ||
| 180mm | 7” | 4mm | 250-680-184 | ||
| 180mm | 7” | 5mm | 250-680-185 | ||
| 180mm | 7” | 6mm | 250-680-186 | ||
| 200mm | 8” | 1mm | 250-680-201 | ||
| 200mm | 8” | 2mm | 250-680-202 | ||
| 200mm | 8” | 3mm | 250-680-203 | ||
| 200mm | 8” | 4mm | 250-680-204 | ||
| 200mm | 8” | 5mm | 250-680-205 | ||
| 200mm | 8” | 6mm | 250-680-206 |
-7%
KERRISON Swivel Punch bayonet shaped shaft 2-piece detachable punch
SKU:
MP-250-650-111
| Jaw Configuration | Length (mm) | Length (inches) | Tip Size | Reference Number |
| Standard / Straight Jaw | 180mm | 7” | 1mm | 250-650-111 |
| 180mm | 7” | 2mm | 250-650-112 | |
| 180mm | 7” | 3mm | 250-650-113 | |
| 180mm | 7” | 4mm | 250-650-114 | |
| 180mm | 7” | 5mm | 250-650-115 | |
| 180mm | 7” | 6mm | 250-650-116 | |
| 200mm | 8” | 1mm | 250-650-151 | |
| 200mm | 8” | 2mm | 250-650-152 | |
| 200mm | 8” | 3mm | 250-650-153 | |
| 200mm | 8” | 4mm | 250-650-154 | |
| 200mm | 8” | 5mm | 250-650-155 | |
| 200mm | 8” | 6mm | 250-650-156 | |
| 230mm | 9” | 1mm | 250-650-181 | |
| 230mm | 9” | 2mm | 250-650-182 | |
| 230mm | 9” | 3mm | 250-650-183 | |
| 230mm | 9” | 4mm | 250-650-184 | |
| 230mm | 9” | 5mm | 250-650-185 | |
| 230mm | 9” | 6mm | 250-650-186 | |
| Left Curved Jaw | 180mm | 7” | 1mm | 250-651-111 |
| 180mm | 7” | 2mm | 250-651-112 | |
| 180mm | 7” | 3mm | 250-651-113 | |
| 180mm | 7” | 4mm | 250-651-114 | |
| 180mm | 7” | 5mm | 250-651-115 | |
| 180mm | 7” | 6mm | 250-651-116 | |
| 200mm | 8” | 1mm | 250-651-151 | |
| 200mm | 8” | 2mm | 250-651-152 | |
| 200mm | 8” | 3mm | 250-651-153 | |
| 200mm | 8” | 4mm | 250-651-154 | |
| 200mm | 8” | 5mm | 250-651-155 | |
| 200mm | 8” | 6mm | 250-651-156 | |
| 230mm | 9” | 1mm | 250-651-181 | |
| 230mm | 9” | 2mm | 250-651-182 | |
| 230mm | 9” | 3mm | 250-651-183 | |
| 230mm | 9” | 4mm | 250-651-184 | |
| 230mm | 9” | 5mm | 250-651-185 | |
| 230mm | 9” | 6mm | 250-651-186 | |
| Right Curved Jaw | 180mm | 7” | 1mm | 250-652-111 |
| 180mm | 7” | 2mm | 250-652-112 | |
| 180mm | 7” | 3mm | 250-652-113 | |
| 180mm | 7” | 4mm | 250-652-114 | |
| 180mm | 7” | 5mm | 250-652-115 | |
| 180mm | 7” | 6mm | 250-652-116 | |
| 200mm | 8” | 1mm | 250-652-151 | |
| 200mm | 8” | 2mm | 250-652-152 | |
| 200mm | 8” | 3mm | 250-652-153 | |
| 200mm | 8” | 4mm | 250-652-154 | |
| 200mm | 8” | 5mm | 250-652-155 | |
| 200mm | 8” | 6mm | 250-652-156 | |
| 230mm | 9” | 1mm | 250-652-181 | |
| 230mm | 9” | 2mm | 250-652-182 | |
| 230mm | 9” | 3mm | 250-652-183 | |
| 230mm | 9” | 4mm | 250-652-184 | |
| 230mm | 9” | 5mm | 250-652-185 | |
| 230mm | 9” | 6mm | 250-652-186 |
-7%
KERRISON Swivel Punch bayonet shaped shaft 2-piece detachable punch
SKU:
MP-250-641-111
| Jaw Configuration | Length (mm) | Length (inches) | Tip Size | Reference Number |
| Standard / Straight Jaw | 180mm | 7” | 1mm | 250-641-111 |
| 180mm | 7” | 2mm | 250-641-112 | |
| 180mm | 7” | 3mm | 250-641-113 | |
| 180mm | 7” | 4mm | 250-641-114 | |
| 180mm | 7” | 5mm | 250-641-115 | |
| 180mm | 7” | 6mm | 250-641-116 | |
| 200mm | 8” | 1mm | 250-641-151 | |
| 200mm | 8” | 2mm | 250-641-152 | |
| 200mm | 8” | 3mm | 250-641-153 | |
| 200mm | 8” | 4mm | 250-641-154 | |
| 200mm | 8” | 5mm | 250-641-155 | |
| 200mm | 8” | 6mm | 250-641-156 | |
| 230mm | 9” | 1mm | 250-641-181 | |
| 230mm | 9” | 2mm | 250-641-182 | |
| 230mm | 9” | 3mm | 250-641-183 | |
| 230mm | 9” | 4mm | 250-641-184 | |
| 230mm | 9” | 5mm | 250-641-185 | |
| 230mm | 9” | 6mm | 250-641-186 | |
| Left Curved Jaw | 180mm | 7” | 1mm | 250-643-111 |
| 180mm | 7” | 2mm | 250-653-112 | |
| 180mm | 7” | 3mm | 250-643-113 | |
| 180mm | 7” | 4mm | 250-643-114 | |
| 180mm | 7” | 5mm | 250-643-115 | |
| 180mm | 7” | 6mm | 250-643-116 | |
| 200mm | 8” | 1mm | 250-643-151 | |
| 200mm | 8” | 2mm | 250-643-152 | |
| 200mm | 8” | 3mm | 250-643-153 | |
| 200mm | 8” | 4mm | 250-643-154 | |
| 200mm | 8” | 5mm | 250-643-155 | |
| 200mm | 8” | 6mm | 250-643-156 | |
| 230mm | 9” | 1mm | 250-643-181 | |
| 230mm | 9” | 2mm | 250-643-182 | |
| 230mm | 9” | 3mm | 250-643-183 | |
| 230mm | 9” | 4mm | 250-643-184 | |
| 230mm | 9” | 5mm | 250-643-185 | |
| 230mm | 9” | 6mm | 250-643-186 | |
| Right Curved Jaw | 180mm | 7” | 1mm | 250-642-111 |
| 180mm | 7” | 2mm | 250-642-112 | |
| 180mm | 7” | 3mm | 250-642-113 | |
| 180mm | 7” | 4mm | 250-642-114 | |
| 180mm | 7” | 5mm | 250-642-115 | |
| 180mm | 7” | 6mm | 250-642-116 | |
| 200mm | 8” | 1mm | 250-642-151 | |
| 200mm | 8” | 2mm | 250-642-152 | |
| 200mm | 8” | 3mm | 250-642-153 | |
| 200mm | 8” | 4mm | 250-642-154 | |
| 200mm | 8” | 5mm | 250-642-155 | |
| 200mm | 8” | 6mm | 250-642-156 | |
| 230mm | 9” | 1mm | 250-642-181 | |
| 230mm | 9” | 2mm | 250-642-182 | |
| 230mm | 9” | 3mm | 250-642-183 | |
| 230mm | 9” | 4mm | 250-642-184 | |
| 230mm | 9” | 5mm | 250-642-185 | |
| 230mm | 9” | 6mm | 250-642-186 |
-17%
KOOS Micro Vessel Knife, 185mm, 71/4”
SKU:
MP-250-064-351
| Item | Manufacturer | Description | Catalog Number |
| A | KOOS | Micro Vessel Knife | 250-064-351 |
| B | KOOS | Micro Vessel Knife | 250-064-352 |
| C | KOOS | Micro Vessel Knife | 250-064-353 |
| D | KOOS | Micro Vessel Knife | 250-064-354 |
| E | KOOS | Micro Vessel Knife | 250-064-356 |
| F | KOOS | Micro Vessel Knife | 250-064-357 |
| G | YASARGIL | Microsurgical Instrument | 250-064-365 |
| H | YASARGIL | Microsurgical Instrument | 250-064-366 |
-14%
KRAYENBÜHL Nerve / Vessel Hook, 185mm, 71/4”
SKU:
MP-250-064-396
| Attribute | Specification |
| Product Line | KRAYENBÜHL Series |
| Material Construction | High-tensile surgical stainless steel or premium titanium alloy, tempered to maintain precise hook geometry without flexing or bending under load. |
| Handle / Shaft Style | Slim-line, ergonomic bayonet or micro-round tactile handle configuration at an overall length of 185 mm ($7\ \frac{1}{4}''$), engineered for maximum field-of-view clearance under microscopic visualization. |
| Tip Architecture | Meticulously blunt-polished micro-hooks designed to safely atraumatically retract, explore, or isolate delicate neurological and vascular components. |
| Functional Application | Indispensable for tactile nerve root exploration, vessel mobilization during microvascular decompression (MVD), and fine tissue dissection in deep cranial or spinal corridors. |
Product Master Data Matrix
The following data table indexes the official master catalog numbers for the KRAYENBÜHL nerve and vessel hook series by configuration variation type, specified at a standardized total length of 185 mm.
| Design Variation Pattern | Total Length (mm) | Length (Inches) | Catalog Number |
| KRAYENBÜHL Type A | 185 mm | $7\ \frac{1}{4}''$ | 250-064-396 |
| KRAYENBÜHL Type B | 185 mm | $7\ \frac{1}{4}''$ | 250-064-397 |
| KRAYENBÜHL Type C | 185 mm | $7\ \frac{1}{4}''$ | 250-064-398 |
| KRAYENBÜHL Type D | 185 mm | $7\ \frac{1}{4}''$ | 250-064-399 |
-5%
Laminectomy Rongeurs
SKU:
MP-250-100-133
| Attribute | Specification |
| Product Type | Intervertebral Disc Rongeur / Pituitary Forceps |
| Model Styles | Love-Gruenwald, Spurling, and Caspar |
| Jaw Pattern | Straight, Upwards Curved, and Downwards Curved configurations |
1. Straight Jaw Configuration
| Shaft Length | Love-Gruenwald (3×10 mm) | Spurling (4×10 mm) | Caspar (5×10 mm) |
| 130 mm / 5⅛” | 250-100-133 | 250-100-134 | 250-100-135 |
| 150 mm / 6” | 250-100-153 | 250-100-154 | 250-100-155 |
| 180 mm / 7” | 250-100-183 | 250-100-184 | 250-100-185 |
| 200 mm / 8” | 250-100-203 | 250-100-204 | 250-100-205 |
| 230 mm / 9” | 250-100-233 | 250-100-234 | 250-100-235 |
2. Upwards Curved Jaw Configuration
Note: Based on standard manufacturing patterns, the $4 \times 10\text{ mm}$ mid-size option is listed sequentially under the upwards/downwards source lines despite the duplicated "5x10mm" label.
| Shaft Length | Love-Gruenwald (3×10 mm) | Spurling (4×10 mm)* | Caspar (5×10 mm) |
| 130 mm / 5⅛” | 250-110-133 | 250-110-134 | 250-110-135 |
| 150 mm / 6” | 250-110-153 | 250-110-154 | 250-110-155 |
| 180 mm / 7” | 250-110-183 | 250-110-184 | 250-110-185 |
| 200 mm / 8” | 250-110-203 | 250-110-204 | 250-110-205 |
| 230 mm / 9” | 250-110-233 | 250-110-234 | 250-110-235 |
3. Downwards Curved Jaw Configuration
| Shaft Length | Love-Gruenwald (3×10 mm) | Spurling (4×10 mm)* | Caspar (5×10 mm) |
| 130 mm / 5⅛” | 250-120-133 | 250-120-134 | 250-120-135 |
| 150 mm / 6” | 250-120-153 | 250-120-154 | 250-120-155 |
| 180 mm / 7” | 250-120-183 | 250-120-184 | 250-120-185 |
| 200 mm / 8” | 250-120-203 | 250-120-204 | 250-120-205 |
| 230 mm / 9” | 250-120-233 | 250-120-234 | 250-120-235 |
-4%
LANDOLT Rongeur, 200mm, 8”
SKU:
MP-250-066-345
| Attribute | Specification |
| Product Type | Transsphenoidal / Intervertebral Disc Rongeur |
| Model Style | Landolt |
| Jaw Diameter | Ø 9 mm (Large round cup pattern) |
| Shaft Length | 200 mm / 8” |
| Application | Extended reach shaft combined with a large round cup, specifically designed for transsphenoidal surgery, tumor decompression, and deep tissue harvesting. |
Product Master Data
| Description | Catalog Number |
| Landolt Rongeur, Ø9mm, 200mm | 250-066-345 |
-16%
LAZAR Micro Suture Tying Forceps 155mm, 61/8”
SKU:
MP- 250-024-260
| Attribute | Specification |
| Product Line | LAZAR Series |
| Material Construction | High-grade surgical stainless steel or lightweight titanium alloy, offering maximum resistance against tip distortion during suture tightening. |
| Handle / Style | Precision-engineered flat handle with structural tactile grooves or fenestrations, providing the surgeon with exceptional control and balance. |
| Jaw / Tying Platform | Features smooth, highly polished micro tying platforms at the tips, specifically calibrated to pull and knot ultra-fine suture filaments without fraying or cutting the material. |
| Functional Application | Expressly designed for tying delicate micro-sutures (typically 8-0 through 11-0) in ophthalmic, plastic reconstructive, and microvascular surgical procedures. |
Product Master Data Matrix
The following data table indexes the official LAZAR micro suture tying forceps catalog numbers by tip dimension, specified at a total length of 155 mm ($6\ \frac{1}{8}''$).
| Tip Dimension / Profile | Tying Platform Style | Total Length (mm) | Length (Inches) | Catalog Number |
| 0.5 mm Ultra-Fine Tip | Smooth Micro-Platform | 155 mm | $6\ \frac{1}{8}''$ | 250-024-260 |
| 0.8 mm Standard Fine Tip | Smooth Micro-Platform | 155 mm | $6\ \frac{1}{8}''$ | 250-024-261 |
USD 
EUR